How to reduce the electrically operated hanging basket accident's occurrence? In the life everywhere can have the accident, the reason that called that it the accident, has not expected, but the accident also divides into two kinds: One kind is avoidable, another kind is inevitable. Then the preceding kind, we must reduce the contingency as far as possible the occurrence. On the electrically operated hanging basket's entire riding chain does not have the problem. The diameter is bigger than the working platform to sell the axis is reasonable, but is this fixes in is hanging on the crossbeam the gallows actually to use an ordinary M14 bolt support, obviously this working point's intensity has the question. The front cross-member is situated in is hanging the organization on the front bracket. The working platform and elevator's peace treaty of 300kg weight adds on the staff and the material gross weight approximately 600kg this working point falls, in two root diameter 16mm sells above the axis. These two root diameter 16mm sells the axis load bearing working platform the weight not to have the problem. But depends upon the elevator to rise and fall φ8.3 the steel wire to fix in is hanging the organization front end a front cross-member root diameter φ18mm to sell on the axis. This diameter 18mm sells the axis to be in receives the multiple bond the place above, this receives on the multiple bond.